1983 Toyota Van tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1983 Toyota Van.

1983 Toyota Van tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1983 – 1990 1 trim

87 hp · 2.0 L 3Y-U I4 Petrol 2.0 L 3Y-U I4 185/75 SR14 / 185/75 SR14 6 fitments

GenerationVan 1983–1990

MarketUSA

Power87 hp

Engine2.0 L 3Y-U I4 Petrol 2.0 L 3Y-U I4, Petrol

Center bore60.1 mm

PCD4x114.3

ThreadM12 x 1.5

Fit	Tire size	Rim size and bolt pattern	Pressure, psi	Prices
OE	Front185/75 SR14	14x ~~4x114.3~~	–	Tires Rims
	Rear185/75 SR14	~~4x114.3~~	–	Tires
OE	Front195/75 SR14	14x ~~4x114.3~~	–	Tires Rims
	Rear195/75 SR14	~~4x114.3~~	–	Tires
OE	Front205/75 SR14	14x ~~4x114.3~~	–	Tires Rims
	Rear205/75 SR14	~~4x114.3~~	–	Tires
Alt	205/75 SR14	14x6 ET25 ~~4x114.3~~	–	Tires Rims
Alt	205/75 SR14	14x6.5 ET20 ~~4x114.3~~	–	Tires Rims
Alt	205/65 SR15	15x6.5 ET20 ~~4x114.3~~	–	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.