Skip to content

2016 Toyota Vios tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2016 Toyota Vios.

2016 Toyota Vios tire sizes

Bolt pattern
Fitment tables

4 trims sold in 2016

Open a trim for its factory package and every alternative size, front and rear.

Toyota Vios II (NCP150)

2013 – 2017 4 trims

Vios 1.3 VVT-i

85 hp · I4 175/65 R14 82T 2 fitments
GenerationII (NCP150) 2013–2017
MarketSoutheast Asia
Power85 hp
EngineI4, Petrol
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
175/65 R14 82T14x5 ET39 4x100–TiresRims
185/60 R15 84H15x5.5 ET45 4x100–TiresRims

Vios 1.3 VVT-i

98 hp · 1.3L 4NR-FE I4 175/65 R14 82T 2 fitments
GenerationII (NCP150) 2013–2017
MarketChina
Power98 hp
Engine1.3L 4NR-FE I4, Petrol
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
175/65 R14 82T14x5 ET39 4x100–TiresRims
185/60 R15 84H15x5.5 ET45 4x1002.1TiresRims

Vios 1.5 VVT-i

107 hp · I4 185/60 R15 84H 2 fitments
GenerationII (NCP150) 2013–2017
MarketSoutheast Asia
Power107 hp
EngineI4, Petrol
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
185/60 R15 84H15x5.5 ET45 4x100–TiresRims
195/50 R16 84V16x6 ET39 4x100–TiresRims

Vios 1.5 VVT-i

106 hp · 1.5L 5NR-FE I4 185/60 R15 84H 2 fitments
GenerationII (NCP150) 2013–2017
MarketChina
Power106 hp
Engine1.5L 5NR-FE I4, Petrol
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
185/60 R15 84H15x5.5 ET45 4x1002.1TiresRims
195/50 R16 84V16x6 ET39 4x1002TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.