1983 Toyota Vista tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1983 Toyota Vista.

1983 Toyota Vista tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1982 – 1986 3 trims

99 hp · 1.8 L 1SLU I4 Petrol 1.8 L 1SLU I4 185/70 SR13 4 fitments

GenerationI (V10) 1982–1986

MarketJapan

Power99 hp

Engine1.8 L 1SLU I4 Petrol 1.8 L 1SLU I4, Petrol

Center bore54.1 mm

PCD5x100

ThreadM12 x 1.5

Fit	Tire size	Rim size and bolt pattern	Pressure, psi	Prices
OE	185/70 SR13	13x5 ET39 ~~5x100~~	–	Tires Rims
Alt	185/70 SR13	13x5.5 ET39 ~~5x100~~	–	Tires Rims
Alt	185/65 SR14	14x5.5 ET39 ~~5x100~~	–	Tires Rims
Alt	195/60 SR14	14x5.5 ET39 ~~5x100~~	–	Tires Rims

79 hp · 1.8 L 1CTL I4 Diesel 1.8 L 1CTL I4 185/70 SR13 4 fitments

GenerationI (V10) 1982–1986

MarketJapan

Power79 hp

Engine1.8 L 1CTL I4 Diesel 1.8 L 1CTL I4, Diesel

Center bore54.1 mm

PCD5x100

ThreadM12 x 1.5

Fit	Tire size	Rim size and bolt pattern	Pressure, psi	Prices
OE	185/70 SR13	13x5 ET39 ~~5x100~~	–	Tires Rims
Alt	185/70 SR13	13x5.5 ET39 ~~5x100~~	–	Tires Rims
Alt	185/65 SR14	14x5.5 ET39 ~~5x100~~	–	Tires Rims
Alt	195/60 SR14	14x5.5 ET39 ~~5x100~~	–	Tires Rims

118 hp · 2.0 L 2SELU I4 Petrol 2.0 L 2SELU I4 185/70 SR13 4 fitments

GenerationI (V10) 1982–1986

MarketJapan

Power118 hp

Engine2.0 L 2SELU I4 Petrol 2.0 L 2SELU I4, Petrol

Center bore54.1 mm

PCD5x100

ThreadM12 x 1.5

Fit	Tire size	Rim size and bolt pattern	Pressure, psi	Prices
OE	185/70 SR13	13x5 ET39 ~~5x100~~	–	Tires Rims
Alt	185/70 SR13	13x5.5 ET39 ~~5x100~~	–	Tires Rims
Alt	185/65 SR14	14x5.5 ET39 ~~5x100~~	–	Tires Rims
Alt	195/60 SR14	14x5.5 ET39 ~~5x100~~	–	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.