2001 Toyota Windom tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2001 Toyota Windom.

2001 Toyota Windom tire sizes

205/65R15 205/60R16 215/60R16

Bolt pattern

5x114.3

2 generations were sold in 2001. Check your chassis code before ordering wheels.

Other years

1997 1998 1999 2000 2001 2002 2003 2004 All 1991–2006

Fitment tables

3 trims sold in 2001

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Toyota Windom III (V30)

2001 – 2006 1 trim

Windom 3.0 VVT-i (MCV30)

212 hp · V6 215/60 R16 95H 1 fitment

GenerationIII (V30) 2001–2006

Power212 hp

EngineV6, Petrol

Center bore60.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
215/60 R16 95H	16x6.5 ET50 ~~5x114.3~~	–	Tires Rims

Toyota Windom II (V20)

1996 – 2001 2 trims

Windom 2.5 VVT-i (MCV21)

197 hp · V6 205/65 R15 94H 2 fitments

GenerationII (V20) 1996–2001

Power197 hp

EngineV6, Petrol

Center bore60.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/65 R15 94H	15x6 ET45 ~~5x114.3~~	–	Tires Rims
205/60 R16 92H	16x6 ET45 ~~5x114.3~~	–	Tires Rims

Windom 3.0 VVT-i (MCV20)

212 hp · V6 205/65 R15 94H 2 fitments

GenerationII (V20) 1996–2001

Power212 hp

EngineV6, Petrol

Center bore60.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/65 R15 94H	15x6 ET45 ~~5x114.3~~	–	Tires Rims
205/60 R16 92H	16x6 ET45 ~~5x114.3~~	–	Tires Rims

Reading the table

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.