Skip to content

2014 Toyota Wish tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2014 Toyota Wish.

2014 Toyota Wish tire sizes

Bolt pattern
Fitment tables

5 trims sold in 2014

Open a trim for its factory package and every alternative size, front and rear.

Toyota Wish II

2009 – 2017 5 trims

Wish 1.8i (DBA-ZGE20G)

141 hp · I4 195/65 R15 91S 1 fitment
GenerationII 2009–2017
Power141 hp
EngineI4, Petrol
Center bore54.1 mm
PCD5x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195/65 R15 91S15x6 ET45 5x10033TiresRims

Wish 1.8i (DBA-ZGE20W)

141 hp · I4 195/65 R15 91S 2 fitments
GenerationII 2009–2017
Power141 hp
EngineI4, Petrol
Center bore54.1 mm
PCD5x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195/65 R15 91S15x6 ET45 5x10033TiresRims
195/60 R16 89H16x6 ET45 5x10033TiresRims

Wish 1.8i (DBA-ZGE25G)

129 hp · I4 195/65 R15 91S 1 fitment
GenerationII 2009–2017
Power129 hp
EngineI4, Petrol
Center bore54.1 mm
PCD5x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195/65 R15 91S15x6 ET45 5x10035TiresRims

Wish 1.8i (DBA-ZGE25W)

129 hp · I4 195/65 R15 91S 1 fitment
GenerationII 2009–2017
Power129 hp
EngineI4, Petrol
Center bore54.1 mm
PCD5x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195/65 R15 91S15x6 ET45 5x10035TiresRims

Wish 2.0i (DBA-ZGE22W)

150 hp · I4 215/50 R17 91V 1 fitment
GenerationII 2009–2017
Power150 hp
EngineI4, Petrol
Center bore54.1 mm
PCD5x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
215/50 R17 91V17x7 ET45 5x10032TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.