Skip to content

2015 UAZ Patriot tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2015 UAZ Patriot.

Bolt pattern
Fitment tables

2 trims sold in 2015

Open a trim for its factory package and every alternative size, front and rear.

UAZ Patriot 3163 Facelift I

2014 – 2016 Europe market 2 trims

Patriot 2.2d

112 hp · 2.2L ZMZ-51432 I4 225/75 SR16 5 fitments
Generation3163 Facelift I 2014–2016
Power112 hp
Engine2.2L ZMZ-51432 I4, Diesel
Center bore108 mm
PCD5x139.7
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
225/75 SR1616x6.5 ET40 5x139.72.4TiresRims
235/70 SR1616x7 ET35 5x139.72.2TiresRims
245/70 SR1616x7 ET35 5x139.72.1TiresRims
245/65 SR1717x7 ET35 5x139.72TiresRims
245/60 SR1818x7 ET35 5x139.72TiresRims

Patriot 2.7i

126 hp · 2.7L ZMZ-40905 I4 225/75 SR16 5 fitments
Generation3163 Facelift I 2014–2016
Power126 hp
Engine2.7L ZMZ-40905 I4, Petrol
Center bore108 mm
PCD5x139.7
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
225/75 SR1616x6.5 ET40 5x139.72.4TiresRims
235/70 SR1616x7 ET35 5x139.72.2TiresRims
245/70 SR1616x7 ET35 5x139.72.1TiresRims
245/65 SR1717x7 ET35 5x139.72TiresRims
245/60 SR1818x7 ET35 5x139.72TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.