Skip to content

2011 VAZ 2110 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2011 VAZ 2110.

Bolt pattern
Fitment tables

2 trims sold in 2011

Open a trim for its factory package and every alternative size, front and rear.

VAZ 2110 2110x

1996 – 2015 Europe market 2 trims

2110 1.6i

80 hp · 1.6L I4 175/70 R13 82T 5 fitments
Generation2110x 1996–2015
Power80 hp
Engine1.6L I4, Petrol
Center bore58.6 mm
PCD4x98
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
175/70 R13 82T13x5 ET35 4x9828TiresRims
175/65 R14 82T14x5 ET35 4x9829TiresRims
175/65 R14 82T14x5.5 ET35 4x9829TiresRims
185/60 R14 82H14x5.5 ET35 4x9829TiresRims
185/60 R14 82H14x6 ET35 4x9829TiresRims

2110 1.6i 16V

89 hp · 1.6L I4 175/65 R14 82H 5 fitments
Generation2110x 1996–2015
Power89 hp
Engine1.6L I4, Petrol
Center bore58.6 mm
PCD4x98
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
175/65 R14 82H14x5 ET35 4x9829TiresRims
185/60 R14 82H14x5.5 ET35 4x9829TiresRims
185/60 R14 82H14x6 ET35 4x9829TiresRims
185/55 R15 82V15x6 ET35 4x9830TiresRims
195/50 R15 84V15x6.5 ET35 4x9830TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.