Skip to content

1972 Volkswagen Beetle tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1972 Volkswagen Beetle.

1972 Volkswagen Beetle tire sizes

Bolt pattern
Fitment tables

1 trim sold in 1972

Open a trim for its factory package and every alternative size, front and rear.

Volkswagen Beetle Mk2

1985 – 2003 Latin America market 1 trim

Beetle 1.6

46 hp · 1.6L I4 5.60x R15 5 fitments
GenerationMk2 1985–2003
Power46 hp
Engine1.6L I4, Petrol
Center bore78.6 mm
PCD4x130
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
5.60x R1515x4 ET20 4x1301.7TiresRims
5.60x R1515x4.5 ET34 4x1301.7TiresRims
145x R1515x4.5 ET20 4x1301.9TiresRims
165/70 R1515x4.5 ET20 4x1301.9TiresRims
175/65 R1515x5 ET15 4x1301.9TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.