Skip to content

2020 Volkswagen Beetle tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2020 Volkswagen Beetle.

2020 Volkswagen Beetle tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2020

Open a trim for its factory package and every alternative size, front and rear.

Volkswagen Beetle A5 Facelift

2016 – 2024 Europe market 2 trims

Beetle 1.2 TSI

103 hp · 1.2L CYVD I4 215/60 R16 95T 4 fitments
GenerationA5 Facelift 2016–2024
Power103 hp
Engine1.2L CYVD I4, Petrol
Center bore57.1 mm
PCD5x112
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
215/60 R16 95T16x6.5 ET44 5x11229TiresRims
215/55 R17 94H17x7 ET43 5x11229TiresRims
235/45 R18 94H18x8 ET48 5x11229TiresRims
235/40 R19 92V19x8 ET48 5x11232TiresRims

Beetle 1.4 TSI

148 hp · 1.4L CZDA I4 215/55 R17 94H 4 fitments
GenerationA5 Facelift 2016–2024
Power148 hp
Engine1.4L CZDA I4, Petrol
Center bore57.1 mm
PCD5x112
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
215/55 R17 94H17x7 ET43 5x11229TiresRims
235/45 R18 94H18x8 ET48 5x11229TiresRims
215/60 R16 95T16x6.5 ET44 5x11229TiresRims
235/40 R19 92V19x8 ET48 5x11232TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.