Skip to content
tirewheelguide.com

1990 Volkswagen Caddy tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1990 Volkswagen Caddy.

1990 Volkswagen Caddy tire sizes

185/60RH14175/70RS13175/65RS14185/55RV15
Bolt pattern
Other years
19861987198819891990199119921995 All 1982–2027
Fitment tables

3 trims sold in 1990

Open a trim for its factory package and every alternative size, front and rear.

Volkswagen Caddy I (Typ 14K)

1982 – 1992 Europe market 3 trims

Caddy 1.6

74 hp · EW I4 155x SR13 5 fitments
GenerationI (Typ 14K) 1982–1992
Power74 hp
EngineEW I4, Petrol
Center bore57.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
155x SR1313x4.5 ET45 4x1002.2TiresRims
175/70 SR1313x5 ET38 4x1002.4TiresRims
175/65 SR1414x5 ET40 4x1002.5TiresRims
185/60 HR1414x5.5 ET42 4x1002.5TiresRims
185/55 VR1515x6 ET38 4x1002.6TiresRims

Caddy 1.6 D

54 hp · JK ME I4 155x SR13 5 fitments
GenerationI (Typ 14K) 1982–1992
Power54 hp
EngineJK ME I4, Diesel
Center bore57.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
155x SR1313x4.5 ET45 4x1002.2TiresRims
175/70 SR1313x5 ET38 4x1002.4TiresRims
175/65 SR1414x5 ET40 4x1002.5TiresRims
185/60 HR1414x5.5 ET42 4x1002.5TiresRims
185/55 VR1515x6 ET38 4x1002.6TiresRims

Caddy 1.8

94 hp · JH I4 155x SR13 5 fitments
GenerationI (Typ 14K) 1982–1992
Power94 hp
EngineJH I4, Petrol
Center bore57.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
155x SR1313x4.5 ET45 4x1002.2TiresRims
175/70 SR1313x5 ET38 4x1002.4TiresRims
175/65 SR1414x5 ET40 4x1002.5TiresRims
185/60 HR1414x5.5 ET42 4x1002.5TiresRims
185/55 VR1515x6 ET38 4x1002.6TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.

Open the size calculator
Recent articles

Guides worth reading first

All articles
Basics

How to read a tire sidewall

Reading a tire sidewall is easy. Find out what the size, load index, speed rating and date code mean.

Continue reading
Guide

Everything you need to know about tire tread depth

Tire tread depth is an important factor in keeping your vehicle safe — how to measure it and when to replace.

Continue reading
Gear

Best supercapacitor jump starter review

We tested seven supercapacitor jump starters to find the ones worth buying.

Continue reading