Skip to content

1983 Volkswagen Gol tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1983 Volkswagen Gol.

1983 Volkswagen Gol tire sizes

Bolt pattern
Fitment tables

5 trims sold in 1983

Open a trim for its factory package and every alternative size, front and rear.

Volkswagen Gol G1

1980 – 1994 Latin America market 5 trims

Gol 1.0

50 hp · I4 155/70 R13 81S 2 fitments
GenerationG1 1980–1994
Power50 hp
EngineI4, Petrol
Center bore57.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
155/70 R13 81S13x5 ET38 4x100–TiresRims
175/65 R13 83S13x5.5 ET38 4x100–TiresRims

Gol 1.3

55 hp · 1.3L F4 155/70 R13 81S 2 fitments
GenerationG1 1980–1994
Power55 hp
Engine1.3L F4, Petrol
Center bore57.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
155/70 R13 81S13x5 ET38 4x100–TiresRims
185/65 R13 83S13x5.5 ET38 4x100–TiresRims

Gol 1.5

63 hp · 1.5L I4 155/70 R13 81S 2 fitments
GenerationG1 1980–1994
Power63 hp
Engine1.5L I4, Petrol
Center bore57.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
155/70 R13 81S13x5 ET38 4x100–TiresRims
185/65 R13 83S13x5.5 ET38 4x100–TiresRims

Gol 1.6

68 hp · 1.6L F4 155/70 R13 81S 2 fitments
GenerationG1 1980–1994
Power68 hp
Engine1.6L F4, Petrol
Center bore57.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
155/70 R13 81S13x5 ET38 4x100–TiresRims
185/65 R13 83S13x5.5 ET38 4x100–TiresRims

Gol 1.8

99 hp · I4 185/55 R14 83H 1 fitment
GenerationG1 1980–1994
Power99 hp
EngineI4, Petrol
Center bore57.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
185/55 R14 83H14x6 ET35 4x100–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.