Skip to content

2020 Volkswagen Gol tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2020 Volkswagen Gol.

2020 Volkswagen Gol tire sizes

Bolt pattern
Fitment tables

4 trims sold in 2020

Open a trim for its factory package and every alternative size, front and rear.

Volkswagen Gol G8

2019 – 2023 Latin America market 4 trims

Gol 1.0 MPI

83 hp · 1.0L I3 Flex-Fuel 185/65 R14 86T 3 fitments
GenerationG8 2019–2023
Power83 hp
Engine1.0L I3 Flex-Fuel
Center bore57.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
185/65 R14 86T14x5 ET38 4x10033TiresRims
175/70 R14 84T14x5 ET38 4x10030TiresRims
195/55 R15 85H15x6 ET38 4x10035TiresRims

Gol 1.6 MSI

118 hp · 1.6L I4 Flex-Fuel 195/55 R15 85H 3 fitments
GenerationG8 2019–2023
Power118 hp
Engine1.6L I4 Flex-Fuel
Center bore57.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195/55 R15 85H15x6 ET38 4x10035TiresRims
185/65 R14 86T14x5 ET38 4x10033TiresRims
195/50 R16 84V16x6 ET40 4x10035TiresRims

Gol 1.6 MSI

110 hp · 1.6L I4 195/55 R15 85H 3 fitments
GenerationG8 2019–2023
Power110 hp
Engine1.6L I4, Petrol
Center bore57.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195/55 R15 85H15x6 ET38 4x10035TiresRims
185/65 R14 86T14x5 ET38 4x10033TiresRims
195/50 R16 84V16x6 ET40 4x10035TiresRims

Gol 1.6i

99 hp · 1.6L I4 195/55 R15 85H 3 fitments
GenerationG8 2019–2023
Power99 hp
Engine1.6L I4, Petrol
Center bore57.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195/55 R15 85H15x6 ET38 4x10035TiresRims
185/65 R14 86T14x5 ET38 4x10033TiresRims
195/50 R16 84V16x6 ET40 4x10035TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.