Skip to content

1992 Volkswagen Jetta tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1992 Volkswagen Jetta.

Fitment tables

4 trims sold in 1992

Open a trim for its factory package and every alternative size, front and rear.

Volkswagen Jetta A2

1984 – 1992 Europe market 4 trims

Jetta 1.3

54 hp · HK MH I4 175/70 SR13 3 fitments
GenerationA2 1984–1992
MarketEurope
Power54 hp
EngineHK MH I4, Petrol
Center bore57.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
175/70 SR1313x5.5 ET42 4x100–TiresRims
185/60 SR1414x6 ET38 4x100–TiresRims
195/50 HR1515x6 ET38 4x100–TiresRims

Jetta 1.6

74 hp · ABN EZ I4 175/70 SR13 3 fitments
GenerationA2 1984–1992
MarketEurope
Power74 hp
EngineABN EZ I4, Petrol
Center bore57.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
175/70 SR1313x5.5 ET42 4x100–TiresRims
185/60 SR1414x6 ET38 4x100–TiresRims
195/50 HR1515x6 ET38 4x100–TiresRims

Jetta 1.8 (E-16RV)

103 hp · RV I4 185/60 R14 82H 4 fitments
GenerationA2 1984–1992
MarketJapan
Power103 hp
EngineRV I4, Petrol
Center bore57.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
185/60 R14 82H14x6 ET38 4x10029TiresRims
185/55 VR1515x6 ET38 4x10029TiresRims
175/70 R13 82T13x5.5 ET38 4x1001.9TiresRims
195/50 HR1515x6 ET38 4x1001.9TiresRims

Jetta 2.0

134 hp · 9A I4 185/60 HR14 3 fitments
GenerationA2 1984–1992
MarketUSA
Power134 hp
Engine9A I4, Petrol
Center bore57.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
185/60 HR1414x6 ET38 4x100–TiresRims
195/50 HR1515x6.5 ET38 4x100–TiresRims
205/40 VR1616x7 ET35 4x100–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.