Skip to content

1993 Volkswagen Logus tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1993 Volkswagen Logus.

1993 Volkswagen Logus tire sizes

Bolt pattern
Fitment tables

2 trims sold in 1993

Open a trim for its factory package and every alternative size, front and rear.

Volkswagen Logus Logus

1993 – 1997 2 trims

Logus 1.6

80 hp · 1.6L I4 Flex-Fuel 175/70 R13 82T 5 fitments
GenerationLogus 1993–1997
Power80 hp
Engine1.6L I4 Flex-Fuel
Center bore63.4 mm
PCD4x108
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
175/70 R13 82T13x5 ET41 4x1081.8TiresRims
165/70 R1313x5 ET41 4x1081.8TiresRims
175/65 R14 82H14x5.5 ET41 4x1081.8TiresRims
185/60 R14 82H14x6 ET41 4x1081.8TiresRims
195/50 R1515x6 ET41 4x1081.8TiresRims

Logus 1.8

87 hp · 1.8L I4 Flex-Fuel 175/70 R13 82T 5 fitments
GenerationLogus 1993–1997
Power87 hp
Engine1.8L I4 Flex-Fuel
Center bore63.4 mm
PCD4x108
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
175/70 R13 82T13x5 ET41 4x1081.8TiresRims
165/70 R1313x5 ET41 4x1081.8TiresRims
175/65 R14 82H14x5.5 ET41 4x1081.8TiresRims
185/60 R14 82H14x6 ET41 4x1081.8TiresRims
195/50 R1515x6 ET41 4x1081.8TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.