Skip to content

1995 Volkswagen Passat Variant tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1995 Volkswagen Passat Variant.

1995 Volkswagen Passat Variant tire sizes

Bolt patterns
Fitment tables

4 trims sold in 1995

Open a trim for its factory package and every alternative size, front and rear.

Volkswagen Passat Variant B4

1993 – 1997 4 trims

Passat Variant 2.0

114 hp · I4 195/60 R14 85V 3 fitments
GenerationB4 1993–1997
MarketEurope
Power114 hp
EngineI4, Petrol
Center bore57.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195/60 R14 85V14x6 ET38 4x10030TiresRims
195/55 R15 84V15x6 ET35 4x10030TiresRims
185/65 R14 86T14x6 ET38 4x10030TiresRims

Passat Variant 2.0 (E-3AADY)

114 hp · I4 195/60 R14 85V 4 fitments
GenerationB4 1993–1997
MarketJapan
Power114 hp
EngineI4, Petrol
Center bore57.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195/60 R14 85V14x6 ET38 4x10030TiresRims
205/50 ZR15 86W15x7 ET33 4x10035TiresRims
185/65 R14 86T14x6 ET38 4x10030TiresRims
195/55 R15 84V15x6 ET35 4x10030TiresRims

Passat Variant 2.8 VR6

172 hp · V6 205/50 ZR15 86W 2 fitments
GenerationB4 1993–1997
MarketEurope
Power172 hp
EngineV6, Petrol
Center bore57.1 mm
PCD5x100
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/50 ZR15 86W15x7 ET33 5x10038TiresRims
195/55 R15 84V15x6 ET35 5x10030TiresRims

Passat Variant 2.8 VR6 (E-3AAAA)

168 hp · V6 205/50 ZR15 86W 2 fitments
GenerationB4 1993–1997
MarketJapan
Power168 hp
EngineV6, Petrol
Center bore57.1 mm
PCD5x100
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/50 ZR15 86W15x7 ET33 5x10038TiresRims
195/55 R15 84V15x6 ET35 5x10030TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.