Skip to content

1984 Volkswagen Polo tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1984 Volkswagen Polo.

Bolt pattern
Fitment tables

5 trims sold in 1984

Open a trim for its factory package and every alternative size, front and rear.

Volkswagen Polo Mk2 (86C)

1981 – 1990 5 trims

Polo 1.05

39 hp · GL I4 155/70 SR13 6 fitments
GenerationMk2 (86C) 1981–1990
Power39 hp
EngineGL I4, Petrol
Center bore57.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
155/70 SR1313x4.5 ET38 4x10028TiresRims
145/70 R13 75T13x5 ET35 4x10026TiresRims
165/65 SR1313x5.5 ET38 4x10026TiresRims
155/65 R14 75T14x5.5 ET38 4x10029TiresRims
165/55 R15 75T15x5.5 ET38 4x10032TiresRims
175/50 R15 75T15x5.5 ET38 4x10032TiresRims

Polo 1.1

50 hp · HB I4 155/70 SR13 8 fitments
GenerationMk2 (86C) 1981–1990
Power50 hp
EngineHB I4, Petrol
Center bore57.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
155/70 SR1313x4.5 ET38 4x10028TiresRims
155x SR1313x4.5 ET38 4x10028TiresRims
145/70 R13 75T13x5 ET35 4x10026TiresRims
175/70 SR1313x5 ET38 4x10028TiresRims
165/65 SR1313x5.5 ET38 4x10026TiresRims
155/65 R14 75T14x5.5 ET38 4x10029TiresRims
165/55 R15 75T15x5.5 ET38 4x10032TiresRims
175/50 R15 75T15x5.5 ET38 4x10032TiresRims

Polo 1.3

50 hp · HW I4 155/70 SR13 6 fitments
GenerationMk2 (86C) 1981–1990
Power50 hp
EngineHW I4, Petrol
Center bore57.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
155/70 SR1313x4.5 ET38 4x10028TiresRims
145/70 R13 75T13x5 ET35 4x10026TiresRims
165/65 SR1313x5.5 ET38 4x10026TiresRims
155/65 R14 75T14x5.5 ET38 4x10029TiresRims
165/55 R15 75T15x5.5 ET38 4x10032TiresRims
175/50 R15 75T15x5.5 ET38 4x10032TiresRims

Polo 1.3

54 hp · HK I4 155/70 SR13 6 fitments
GenerationMk2 (86C) 1981–1990
Power54 hp
EngineHK I4, Petrol
Center bore57.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
155/70 SR1313x4.5 ET38 4x10028TiresRims
145/70 R13 75T13x5 ET35 4x10026TiresRims
165/65 SR1313x5.5 ET38 4x10026TiresRims
155/65 R14 75T14x5.5 ET38 4x10029TiresRims
165/55 R15 75T15x5.5 ET38 4x10032TiresRims
175/50 R15 75T15x5.5 ET38 4x10032TiresRims

Polo 1.3

74 hp · GK I4 155/70 SR13 6 fitments
GenerationMk2 (86C) 1981–1990
Power74 hp
EngineGK I4, Petrol
Center bore57.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
155/70 SR1313x4.5 ET38 4x10028TiresRims
145/70 R13 75T13x5 ET35 4x10026TiresRims
165/65 SR1313x5.5 ET38 4x10026TiresRims
155/65 R14 75T14x5.5 ET38 4x10029TiresRims
165/55 R15 75T15x5.5 ET38 4x10032TiresRims
175/50 R15 75T15x5.5 ET38 4x10032TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.