Skip to content
tirewheelguide.com

2012 Volkswagen Santana tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2012 Volkswagen Santana.

2012 Volkswagen Santana tire sizes

195/50R16195/60RH14195/55RH15175/70RS14185/65RS14
Bolt pattern
Other years
20082009201020112012201320142015 All 1985–2023
Fitment tables

3 trims sold in 2012

Open a trim for its factory package and every alternative size, front and rear.

Volkswagen Santana IV (Vista)

2008 – 2012 3 trims

Santana 1.6i

94 hp · 1.6L I4 175/70 SR14 5 fitments
GenerationIV (Vista) 2008–2012
Power94 hp
Engine1.6L I4, Petrol
Center bore57.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
175/70 SR1414x5.5 ET42 4x100–TiresRims
185/65 SR1414x5.5 ET42 4x100–TiresRims
195/60 HR1414x6 ET38 4x100–TiresRims
195/55 HR1515x6 ET38 4x100–TiresRims
195/50 R1616x6 ET38 4x100–TiresRims

Santana 1.8i

103 hp · 1.8L I4 175/70 SR14 5 fitments
GenerationIV (Vista) 2008–2012
Power103 hp
Engine1.8L I4, Petrol
Center bore57.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
175/70 SR1414x5.5 ET42 4x100–TiresRims
185/65 SR1414x5.5 ET42 4x100–TiresRims
195/60 HR1414x6 ET38 4x100–TiresRims
195/55 HR1515x6 ET38 4x100–TiresRims
195/50 R1616x6 ET38 4x100–TiresRims

Santana 2.0i

118 hp · 2.0L I4 175/70 SR14 5 fitments
GenerationIV (Vista) 2008–2012
Power118 hp
Engine2.0L I4, Petrol
Center bore57.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
175/70 SR1414x5.5 ET42 4x100–TiresRims
185/65 SR1414x5.5 ET42 4x100–TiresRims
195/60 HR1414x6 ET38 4x100–TiresRims
195/55 HR1515x6 ET38 4x100–TiresRims
195/50 R1616x6 ET38 4x100–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.

Open the size calculator
Recent articles

Guides worth reading first

All articles
Basics

How to read a tire sidewall

Reading a tire sidewall is easy. Find out what the size, load index, speed rating and date code mean.

Continue reading
Guide

Everything you need to know about tire tread depth

Tire tread depth is an important factor in keeping your vehicle safe — how to measure it and when to replace.

Continue reading
Gear

Best supercapacitor jump starter review

We tested seven supercapacitor jump starters to find the ones worth buying.

Continue reading