Skip to content

2011 Volkswagen Up! tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2011 Volkswagen Up!.

2011 Volkswagen Up! tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2011

Open a trim for its factory package and every alternative size, front and rear.

Volkswagen Up! I

2011 – 2017 2 trims

Up! 1.0 MPI

74 hp · 1.0L I3 165/70 R14 81T 5 fitments
GenerationI 2011–2017
Power74 hp
Engine1.0L I3, Petrol
Center bore57.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
165/70 R14 81T14x5 ET35 4x1001.8TiresRims
175/65 R14 82T14x5 ET35 4x1001.8TiresRims
185/55 R15 82T15x5.5 ET41 4x1001.8TiresRims
185/50 R16 81T16x6 ET43 4x1001.8TiresRims
195/40 R17 81T17x6.5 ET43 4x1002TiresRims

Up! 1.0i

59 hp · 1.0L I3 165/70 R14 81T 5 fitments
GenerationI 2011–2017
Power59 hp
Engine1.0L I3, Petrol
Center bore57.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
165/70 R14 81T14x5 ET35 4x1001.8TiresRims
175/65 R14 82T14x5 ET35 4x1001.8TiresRims
185/55 R15 82T15x5.5 ET41 4x1001.8TiresRims
185/50 R16 81T16x6 ET43 4x1001.8TiresRims
195/40 R17 81T17x6.5 ET43 4x1002TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.