Skip to content

2014 Volkswagen Vento tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2014 Volkswagen Vento.

2014 Volkswagen Vento tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2014

Open a trim for its factory package and every alternative size, front and rear.

Volkswagen Vento A05

2013 – 2015 2 trims

Vento 1.6 MPI

103 hp · I4 175/70 R14 84T 6 fitments
GenerationA05 2013–2015
Power103 hp
EngineI4, Petrol
Center bore57.1 mm
PCD5x100
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
175/70 R14 84T14x5 ET35 5x10028TiresRims
185/60 R15 84T15x6 ET38 5x10028TiresRims
185/60 R15 88T15x6 ET40 5x10028TiresRims
195/55 R15 85T15x6 ET40 5x10028TiresRims
215/45 R16 86T16x7 ET46 5x10028TiresRims
215/40 R17 87T17x7 ET46 5x10028TiresRims

Vento 1.6 TDI

103 hp · I4 175/70 R14 84T 6 fitments
GenerationA05 2013–2015
Power103 hp
EngineI4, Diesel
Center bore57.1 mm
PCD5x100
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
175/70 R14 84T14x5 ET35 5x10028TiresRims
185/60 R15 84T15x6 ET38 5x10028TiresRims
185/60 R15 88T15x6 ET40 5x10028TiresRims
195/55 R15 85T15x6 ET40 5x10028TiresRims
215/45 R16 86T16x7 ET46 5x10028TiresRims
215/40 R17 87T17x7 ET46 5x10028TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.