1972 Volvo 140 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1972 Volvo 140.

1972 Volvo 140 tire sizes

195/65R15

Bolt pattern

5x108

Other years

1968 1969 1970 1971 1972 1973 1974 1975 All 1966–1975

Fitment tables

4 trims sold in 1972

Open a trim for its factory package and every alternative size, front and rear.

Volvo 140 140

1966 – 1975 Europe market 4 trims

140 1.8

74 hp · 1.8L I4 175x R14 88S 2 fitments

Generation140 1966–1975

Power74 hp

Engine1.8L I4, Petrol

Center bore65.1 mm

PCD5x108

Thread1/2" - 20 UNF

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
175x R14 88S	14x5.5 ET25 ~~5x108~~	28	Tires Rims
195/65 R15 88H	15x6 ET25 ~~5x108~~	29	Tires Rims

140 1.8 Dual Carb

99 hp · 1.8L I4 175x R14 88S 2 fitments

Generation140 1966–1975

Power99 hp

Engine1.8L I4, Petrol

Center bore65.1 mm

PCD5x108

Thread1/2" - 20 UNF

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
175x R14 88S	14x5.5 ET25 ~~5x108~~	28	Tires Rims
195/65 R15 88H	15x6 ET25 ~~5x108~~	29	Tires Rims

140 2.0

80 hp · 2.0L I4 175x R14 88S 2 fitments

Generation140 1966–1975

Power80 hp

Engine2.0L I4, Petrol

Center bore65.1 mm

PCD5x108

Thread1/2" - 20 UNF

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
175x R14 88S	14x5.5 ET25 ~~5x108~~	28	Tires Rims
195/65 R15 88H	15x6 ET25 ~~5x108~~	29	Tires Rims

140 2.0 Dual Carb

109 hp · 2.0L I4 175x R14 88S 2 fitments

Generation140 1966–1975

Power109 hp

Engine2.0L I4, Petrol

Center bore65.1 mm

PCD5x108

Thread1/2" - 20 UNF

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
175x R14 88S	14x5.5 ET25 ~~5x108~~	28	Tires Rims
195/65 R15 88H	15x6 ET25 ~~5x108~~	29	Tires Rims

Reading the table

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.