Skip to content
tirewheelguide.com

1980 Volvo 260 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1980 Volvo 260.

1980 Volvo 260 tire sizes

195/60R15215/50R16205/50R16
Bolt pattern
Other years
19751976197719781979198019811982 All 1974–1982
Fitment tables

3 trims sold in 1980

Open a trim for its factory package and every alternative size, front and rear.

Volvo 260 I

1974 – 1982 Europe market 3 trims

260 2.7

146 hp · 2.7L B27F V6 195/60 R15 88H 2 fitments
GenerationI 1974–1982
Power146 hp
Engine2.7L B27F V6, Petrol
Center bore65.1 mm
PCD5x108
Thread1/2" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
195/60 R15 88H15x6 ET20 5x10828TiresRims
205/50 R16 88H16x6.5 ET20 5x10830TiresRims

260 2.8

153 hp · 2.8L B28E V6 195/60 R15 88H 2 fitments
GenerationI 1974–1982
Power153 hp
Engine2.8L B28E V6, Petrol
Center bore65.1 mm
PCD5x108
Thread1/2" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
195/60 R15 88H15x6 ET20 5x10828TiresRims
215/50 R16 88H16x7 ET18 5x10830TiresRims

260 2.8

127 hp · 2.8L B28A V6 195/60 R15 88H 2 fitments
GenerationI 1974–1982
Power127 hp
Engine2.8L B28A V6, Petrol
Center bore65.1 mm
PCD5x108
Thread1/2" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
195/60 R15 88H15x6 ET20 5x10828TiresRims
215/50 R16 88H16x7 ET18 5x10830TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.

Open the size calculator
Recent articles

Guides worth reading first

All articles
Basics

How to read a tire sidewall

Reading a tire sidewall is easy. Find out what the size, load index, speed rating and date code mean.

Continue reading
Guide

Everything you need to know about tire tread depth

Tire tread depth is an important factor in keeping your vehicle safe — how to measure it and when to replace.

Continue reading
Gear

Best supercapacitor jump starter review

We tested seven supercapacitor jump starters to find the ones worth buying.

Continue reading