Skip to content

2023 Volvo C40 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2023 Volvo C40.

2023 Volvo C40 tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2023

Open a trim for its factory package and every alternative size, front and rear.

Volvo C40 I

2021 – 2023 2 trims

C40 Single Motor FWD

228 hp · EAD3.1 235/50 R19 103V / 255/45 R19 104V 2 fitments
GenerationI 2021–2023
Power228 hp
EngineEAD3.1, Electric
Center bore63.4 mm
PCD5x108
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
Front235/50 R19 103V19x7.5 ET50.5 5x10841TiresRims
Rear255/45 R19 104V19x8.5 ET56 5x10841TiresRims
Front235/45 R20 100V20x8 ET50.5 5x10841TiresRims
Rear255/40 R20 101V20x9 ET58.5 5x10841TiresRims

C40 Twin Motor AWD

402 hp · EAD3 235/50 R19 103V / 255/45 R19 104V 2 fitments
GenerationI 2021–2023
Power402 hp
EngineEAD3, Electric
Center bore63.4 mm
PCD5x108
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
Front235/50 R19 103V19x7.5 ET50.5 5x10841TiresRims
Rear255/45 R19 104V19x8.5 ET56 5x10841TiresRims
Front235/45 R20 100V20x8 ET50.5 5x10841TiresRims
Rear255/40 R20 101V20x9 ET58.5 5x10841TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.