Skip to content

2021 Wey VV6 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2021 Wey VV6.

2021 Wey VV6 tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2021

Open a trim for its factory package and every alternative size, front and rear.

Wey VV6 VV6

2018 – 2021 2 trims

VV6 1.5T

169 hp · 1.5 L E15BA I4 Petrol 1.5 L E15BA I4 225/60 R18 4 fitments
GenerationVV6 2018–2021
MarketChina
Power169 hp
Engine1.5 L E15BA I4 Petrol 1.5 L E15BA I4, Petrol
Center bore64.1 mm
PCD5x114.3
ThreadM12 x 1.25
FitTire sizeRim size and bolt patternPressure, psiPrices
OE225/60 R1818x7 ET40 5x114.3–TiresRims
OE235/60 R1818x7 ET40 5x114.3–TiresRims
Alt235/55 R1919x7.5 ET40 5x114.3–TiresRims
Alt255/45 ZR2020x8 ET40 5x114.3–TiresRims

VV6 2.0T

224 hp · 2.0 L E20CB I4 Petrol 2.0 L E20CB I4 225/60 R18 4 fitments
GenerationVV6 2018–2021
MarketChina
Power224 hp
Engine2.0 L E20CB I4 Petrol 2.0 L E20CB I4, Petrol
Center bore64.1 mm
PCD5x114.3
ThreadM12 x 1.25
FitTire sizeRim size and bolt patternPressure, psiPrices
OE225/60 R1818x7 ET40 5x114.3–TiresRims
OE235/55 R1919x7.5 ET40 5x114.3–TiresRims
Alt235/60 R1818x7 ET40 5x114.3–TiresRims
Alt255/45 ZR2020x8 ET40 5x114.3–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.