Skip to content

2020 Wuling Hongguang tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2020 Wuling Hongguang.

2020 Wuling Hongguang tire sizes

Bolt pattern
Fitment tables

3 trims sold in 2020

Open a trim for its factory package and every alternative size, front and rear.

Wuling Hongguang II

2018 – 2023 3 trims

Hongguang 1.2i

75 hp · I4 175/70 R14 2 fitments
GenerationII 2018–2023
Power75 hp
EngineI4, Petrol
Center bore60.1 mm
PCD4x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
175/70 R1414x5 ET44 4x114.3–TiresRims
185/70 R1414x5.5 ET44 4x114.3–TiresRims

Hongguang 1.5i

103 hp · L2B I4 175/70 R14 2 fitments
GenerationII 2018–2023
Power103 hp
EngineL2B I4, Petrol
Center bore60.1 mm
PCD4x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
175/70 R1414x5 ET44 4x114.3–TiresRims
185/70 R1414x5.5 ET44 4x114.3–TiresRims

Hongguang 1.5i

98 hp · LAR I4 175/70 R14 2 fitments
GenerationII 2018–2023
Power98 hp
EngineLAR I4, Petrol
Center bore60.1 mm
PCD4x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
175/70 R1414x5 ET44 4x114.3–TiresRims
185/70 R1414x5.5 ET44 4x114.3–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.