Skip to content

2025 Zotye T300 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2025 Zotye T300.

2025 Zotye T300 tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2025

Open a trim for its factory package and every alternative size, front and rear.

Zotye T300 T300

2017 – 2027 2 trims

T300 1.5i

110 hp · 1.5 L TNN4G15B I4 Petrol 1.5 L TNN4G15B I4 205/65 R16 2 fitments
GenerationT300 2017–2027
MarketChina
Power110 hp
Engine1.5 L TNN4G15B I4 Petrol 1.5 L TNN4G15B I4, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE205/65 R1616x6.5 ET40 5x114.3–TiresRims
OE215/55 R1717x7 ET40 5x114.3–TiresRims

T300 1.5T

142 hp · 1.5 L TNN4G15T I4 Petrol 1.5 L TNN4G15T I4 205/65 R16 2 fitments
GenerationT300 2017–2027
MarketMiddle East
Power142 hp
Engine1.5 L TNN4G15T I4 Petrol 1.5 L TNN4G15T I4, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE205/65 R1616x6.5 ET40 5x114.3–TiresRims
OE215/55 R1717x7 ET40 5x114.3–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.