2017 Zotye T600 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2017 Zotye T600.

2017 Zotye T600 tire sizes

235/65R17 235/60R18

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2014 – 2023 3 trims

148 hp · 1.5L 15S4G I4 235/65 R17 2 fitments

GenerationT600 2014–2023

Power148 hp

Engine1.5L 15S4G I4, Petrol

Center bore67.1 mm

PCD5x108

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
235/65 R17	17x7 ET35 ~~5x108~~	–	Tires Rims
235/60 R18	18x7 ET35 ~~5x108~~	–	Tires Rims

160 hp · 1.5L 15S4G I4 235/65 R17 2 fitments

GenerationT600 2014–2023

Power160 hp

Engine1.5L 15S4G I4, Petrol

Center bore67.1 mm

PCD5x108

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
235/65 R17	17x7 ET35 ~~5x108~~	–	Tires Rims
235/60 R18	18x7 ET35 ~~5x108~~	–	Tires Rims

174 hp · 2.0L 4G63S4T I4 235/60 R18 2 fitments

GenerationT600 2014–2023

Power174 hp

Engine2.0L 4G63S4T I4, Petrol

Center bore67.1 mm

PCD5x108

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
235/60 R18	18x7 ET35 ~~5x108~~	–	Tires Rims
235/65 R17	17x7 ET35 ~~5x108~~	–	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.