Skip to content

2002 BMW Z4 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2002 BMW Z4.

2002 BMW Z4 tire sizes

Bolt pattern
Fitment tables

1 trim sold in 2002

Open a trim for its factory package and every alternative size, front and rear.

BMW Z4 I (E85)

2002 – 2005 1 trim

Z4 3.0i

228 hp · 3.0L M54B30 I6 225/40 ZR18 88W / 255/35 ZR18 90W 4 fitments
GenerationI (E85) 2002–2005
Power228 hp
Engine3.0L M54B30 I6, Petrol
Center bore72.6 mm
PCD5x120
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
Front225/40 ZR18 88W18x8 ET47 5x12033TiresRims
Rear255/35 ZR18 90W18x8.5 ET50 5x12036TiresRims
Front225/40 ZR18 88W18x8 ET47 5x12033TiresRims
Rear255/35 ZR18 90W18x8.5 ET50 5x12036TiresRims
225/45 ZR17 91W17x8 ET47 5x1202.5TiresRims
225/50 R16 92H16x7 ET47 5x1202.5TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.