1986 Cadillac Fleetwood Brougham tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1986 Cadillac Fleetwood Brougham.

1986 Cadillac Fleetwood Brougham tire sizes

215/75RH15 225/70RH15 235/70RH15 235/65RH16

Bolt pattern

5x127

Other years

1979 1980 1981 1982 1983 1984 1985 1986 All 1977–1986

Fitment tables

1 trim sold in 1986

Open a trim for its factory package and every alternative size, front and rear.

Cadillac Fleetwood Brougham D-body

1977 – 1986 USA market 1 trim

Fleetwood Brougham 5.0 (Saloon)

140 hp · 5.0 L Oldsmobile 307 V8 Petrol 5.0 L Oldsmobile 307 V8 215/75 HR15 / 215/75 HR15 5 fitments

GenerationD-body 1977–1986

MarketUSA

Power140 hp

Engine5.0 L Oldsmobile 307 V8 Petrol 5.0 L Oldsmobile 307 V8, Petrol

Center bore78.1 mm

PCD5x127

Fit	Tire size	Rim size and bolt pattern	Pressure, psi	Prices
OE	Front215/75 HR15	15x ~~5x127~~	–	Tires Rims
	Rear215/75 HR15	~~5x127~~	–	Tires
Alt	Front225/70 HR15	15x ~~5x127~~	–	Tires Rims
	Rear225/70 HR15	~~5x127~~	–	Tires
Alt	225/70 HR15	15x7 ET10 ~~5x127~~	–	Tires Rims
Alt	235/70 HR15	15x7 ET10 ~~5x127~~	–	Tires Rims
Alt	235/65 HR16	16x7 ET10 ~~5x127~~	–	Tires Rims

Reading the table

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.