2024 Chevrolet S10 Max tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2024 Chevrolet S10 Max.

2024 Chevrolet S10 Max tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2022 – 2027 2 trims

218 hp · 2.0 L 20L4E I4 Petrol 2.0 L 20L4E I4 245/70 R16 3 fitments

GenerationS10 Max 2022–2027

MarketMexico

Power218 hp

Engine2.0 L 20L4E I4 Petrol 2.0 L 20L4E I4, Petrol

Center bore74.6 mm

PCD6x130

ThreadM12 x 1.5

Fit	Tire size	Rim size and bolt pattern	Pressure, psi	Prices
OE	245/70 R16	16x7 ET40 ~~6x130~~	32 F / 41 R	Tires Rims
Alt	245/65 R17	17x7 ET40 ~~6x130~~	32 F / 41 R	Tires Rims
Alt	255/60 R18	18x7.5 ET40 ~~6x130~~	32 F / 41 R	Tires Rims

141 hp · 2.4 L 4G69S4N I4 Petrol 2.4 L 4G69S4N I4 245/70 R16 3 fitments

GenerationS10 Max 2022–2027

MarketMexico

Power141 hp

Engine2.4 L 4G69S4N I4 Petrol 2.4 L 4G69S4N I4, Petrol

Center bore74.6 mm

PCD6x130

ThreadM12 x 1.5

Fit	Tire size	Rim size and bolt pattern	Pressure, psi	Prices
OE	245/70 R16	16x7 ET40 ~~6x130~~	32 F / 41 R	Tires Rims
Alt	245/65 R17	17x7 ET40 ~~6x130~~	32 F / 41 R	Tires Rims
Alt	255/60 R18	18x7.5 ET40 ~~6x130~~	32 F / 41 R	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.