Skip to content

2025 Chevrolet S10 Max tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2025 Chevrolet S10 Max.

2025 Chevrolet S10 Max tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2025

Open a trim for its factory package and every alternative size, front and rear.

Chevrolet S10 Max S10 Max

2022 – 2027 2 trims

S10 Max 2.0T

228 hp · 2.0 L I4 Petrol 2.0 L I4 245/70 R16 3 fitments
GenerationS10 Max 2022–2027
MarketMexico
Power228 hp
Engine2.0 L I4 Petrol 2.0 L I4, Petrol
Center bore74.6 mm
PCD6x130
ThreadM12 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE245/70 R1616x7 ET40 6x13032 F / 41 RTiresRims
Alt245/65 R1717x7 ET40 6x13032 F / 41 RTiresRims
Alt255/60 R1818x7.5 ET40 6x13032 F / 41 RTiresRims

S10 Max 2.4i

141 hp · 2.4 L 4G69S4N I4 Petrol 2.4 L 4G69S4N I4 245/70 R16 3 fitments
GenerationS10 Max 2022–2027
MarketMexico
Power141 hp
Engine2.4 L 4G69S4N I4 Petrol 2.4 L 4G69S4N I4, Petrol
Center bore74.6 mm
PCD6x130
ThreadM12 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE245/70 R1616x7 ET40 6x13032 F / 41 RTiresRims
Alt245/65 R1717x7 ET40 6x13032 F / 41 RTiresRims
Alt255/60 R1818x7.5 ET40 6x13032 F / 41 RTiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.