Skip to content

2024 Chevrolet Silverado 3500 HD tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2024 Chevrolet Silverado 3500 HD.

2024 Chevrolet Silverado 3500 HD tire sizes

Bolt patterns
8x180
IV (T1XX) Facelift
8x210
IV (T1XX) Facelift
Fitment tables

2 trims sold in 2024

Open a trim for its factory package and every alternative size, front and rear.

Chevrolet Silverado 3500 HD IV (T1XX) Facelift

2024 – 2027 2 trims

Silverado 3500 HD 6.6 TD

470 hp · 6.6 L L5P V8 Diesel 6.6 L L5P V8 275/70 R18 2 fitments
GenerationIV (T1XX) Facelift 2024–2027
MarketUSA
Power470 hp
Engine6.6 L L5P V8 Diesel 6.6 L L5P V8, Diesel
Center bore124.1 mm
PCD8x180
ThreadM14 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE275/70 R1818x8 ET44 8x180–TiresRims
Alt275/65 R2020x8.5 ET47 8x180–TiresRims

Silverado 3500 HD 6.6i

401 hp · 6.6 L L8T V8 Petrol 6.6 L L8T V8 235/80 R17 2 fitments
GenerationIV (T1XX) Facelift 2024–2027
MarketUSA
Power401 hp
Engine6.6 L L8T V8 Petrol 6.6 L L8T V8, Petrol
Center bore154.2 mm
PCD8x210
ThreadM14 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE235/80 R1717x6.5 ET125 8x210–TiresRims
Alt275/65 R2020x8.5 ET47 8x180–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.