Skip to content

2012 Citroën C-Quatrè tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2012 Citroën C-Quatrè.

Fitment tables

2 trims sold in 2012

Open a trim for its factory package and every alternative size, front and rear.

Citroën C-Quatrè Typ L

2009 – 2012 China market 2 trims

C-Quatrè 1.6i

109 hp · I4 195/65 R15 93H 5 fitments
GenerationTyp L 2009–2012
Power109 hp
EngineI4, Petrol
Center bore65.1 mm
PCD4x108
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
195/65 R15 93H15x6 ET27 4x10832TiresRims
205/55 R16 91V16x6.5 ET26 4x10833TiresRims
205/50 R17 90V17x6.5 ET25 4x10833TiresRims
215/45 ZR17 89W17x7 ET20 4x10836TiresRims
225/40 ZR18 90W18x7.5 ET19 4x10836TiresRims

C-Quatrè 2.0i

141 hp · I4 205/55 R16 91V 5 fitments
GenerationTyp L 2009–2012
Power141 hp
EngineI4, Petrol
Center bore65.1 mm
PCD4x108
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
205/55 R16 91V16x6.5 ET26 4x10833TiresRims
225/50 R16 91V16x7 ET20 4x10833TiresRims
205/50 R17 90V17x6.5 ET25 4x10832TiresRims
225/45 R17 90V17x7.5 ET19 4x10836TiresRims
235/40 ZR18 89Z18x8 ET15 4x10839TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.