Skip to content

2016 Citroën C-Quatrè tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2016 Citroën C-Quatrè.

Fitment tables

2 trims sold in 2016

Open a trim for its factory package and every alternative size, front and rear.

Citroën C-Quatrè Typ L Facelift

2013 – 2017 China market 2 trims

C-Quatrè 1.6i

115 hp · I4 205/55 R16 91V 6 fitments
GenerationTyp L Facelift 2013–2017
Power115 hp
EngineI4, Petrol
Center bore65.1 mm
PCD4x108
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
205/55 R16 91V16x6.5 ET26 4x10833TiresRims
205/55 R1616x7 ET26 4x10833TiresRims
205/50 R17 90V17x6.5 ET25 4x10833TiresRims
215/45 R17 90V17x7 ET20 4x10836TiresRims
205/45 ZR18 89W18x7 ET25 4x10836TiresRims
225/40 ZR18 89Z18x7.5 ET19 4x10836TiresRims

C-Quatrè 2.0i

145 hp · I4 205/55 R16 91V 5 fitments
GenerationTyp L Facelift 2013–2017
Power145 hp
EngineI4, Petrol
Center bore65.1 mm
PCD4x108
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
205/55 R16 91V16x6.5 ET26 4x10833TiresRims
215/55 R16 91V16x6.5 ET25 4x10833TiresRims
225/50 R16 91V16x7 ET20 4x10833TiresRims
225/45 R17 90V17x7.5 ET19 4x10836TiresRims
235/40 ZR18 89Z18x8 ET15 4x10838TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.