1986 Daihatsu Charade tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1986 Daihatsu Charade.

1986 Daihatsu Charade tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1983 – 1987 Japan market 1 trim

54 hp · 1.0L I3 155/80 R13 75S 4 fitments

GenerationG11 1983–1987

Power54 hp

Engine1.0L I3, Petrol

Center bore60.1 mm

PCD4x110

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
155/80 R13 75S	13x4.5 ET45 ~~4x110~~	26	Tires Rims
165/70 R13 75S	13x4.5 ET45 ~~4x110~~	26	Tires Rims
175/60 R14 75S	14x5 ET45 ~~4x110~~	29	Tires Rims
175/55 R15 74T	15x5.5 ET42 ~~4x110~~	29	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.