Skip to content

1987 Daihatsu Charade tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1987 Daihatsu Charade.

Bolt patterns
4x100
G100

2 generations were sold in 1987. Check your chassis code before ordering wheels.

Fitment tables

5 trims sold in 1987

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Daihatsu Charade G100

1987 – 1993 Japan market 4 trims

Charade 1.0 (E-G100S)

54 hp · I3 155/80 R13 74S 3 fitments
GenerationG100 1987–1993
Power54 hp
EngineI3, Petrol
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
155/80 R13 74S13x4.5 ET45 4x10026TiresRims
165/70 R13 74S13x4.5 ET45 4x10026TiresRims
175/60 R14 74S14x5 ET45 4x10029TiresRims

Charade 1.0 (Q-G101S)

50 hp · I3 145x R13 75S 3 fitments
GenerationG100 1987–1993
Power50 hp
EngineI3, Petrol
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
145x R13 75S13x4 ET50 4x10026TiresRims
155/80 R13 74S13x4.5 ET45 4x10026TiresRims
165/70 R14 72S14x4.5 ET45 4x10026TiresRims

Charade 1.3 (E-G102S)

93 hp · I4 165/70 R13 74S 3 fitments
GenerationG100 1987–1993
Power93 hp
EngineI4, Petrol
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
165/70 R13 74S13x4.5 ET45 4x10026TiresRims
175/65 R14 73H14x5 ET42 4x10030TiresRims
185/55 R15 72H15x5.5 ET42 4x10030TiresRims

Charade 1.3 (E-G112S)

93 hp · I4 155/80 R13 74S 3 fitments
GenerationG100 1987–1993
Power93 hp
EngineI4, Petrol
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
155/80 R13 74S13x4.5 ET45 4x10026TiresRims
165/70 R14 74S14x4.5 ET45 4x10026TiresRims
175/60 R15 73S15x5.5 ET42 4x10029TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.