1963 Dodge Dart tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1963 Dodge Dart.

1963 Dodge Dart tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1963 – 1966 2 trims

101 hp · 2.8 L I6 Petrol 2.8 L I6 185/80 SR13 4 fitments

GenerationIII 1963–1966

MarketUSA

Power101 hp

Engine2.8 L I6 Petrol 2.8 L I6, Petrol

Center bore59.2 mm

PCD5x101.6

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
185/80 SR13	13x4.5 ET31 ~~5x101.6~~	–	Tires Rims
185/75 SR14	14x4.5 ET31 ~~5x101.6~~	–	Tires Rims
185/75 SR14	14x5 ET31 ~~5x101.6~~	–	Tires Rims
205/70 SR14	14x5.5 ET19 ~~5x101.6~~	–	Tires Rims

145 hp · 3.7 L I6 Petrol 3.7 L I6 185/80 SR13 4 fitments

GenerationIII 1963–1966

MarketUSA

Power145 hp

Engine3.7 L I6 Petrol 3.7 L I6, Petrol

Center bore59.2 mm

PCD5x101.6

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
185/80 SR13	13x4.5 ET31 ~~5x101.6~~	–	Tires Rims
185/75 SR14	14x4.5 ET31 ~~5x101.6~~	–	Tires Rims
185/75 SR14	14x5 ET31 ~~5x101.6~~	–	Tires Rims
205/70 SR14	14x5.5 ET19 ~~5x101.6~~	–	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.