Skip to content

2020 Dongfeng AX7 Classic tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2020 Dongfeng AX7 Classic.

2020 Dongfeng AX7 Classic tire sizes

Bolt pattern
Fitment tables

3 trims sold in 2020

Open a trim for its factory package and every alternative size, front and rear.

Dongfeng AX7 Classic Dongfeng Aeolus AX7 Classic

2019 – 2022 3 trims

AX7 Classic 1.4T

148 hp · 1.4 L DFMA14TD I4 Petrol 1.4 L DFMA14TD I4 225/65 R17 3 fitments
GenerationDongfeng Aeolus AX7 Classic 2019–2022
MarketChina
Power148 hp
Engine1.4 L DFMA14TD I4 Petrol 1.4 L DFMA14TD I4, Petrol
Center bore65.1 mm
PCD5x108
ThreadM12 x 1.25
FitTire sizeRim size and bolt patternPressure, psiPrices
OE225/65 R1717x6.5 ET43 5x108–TiresRims
OE225/60 R1818x6.5 ET43 5x108–TiresRims
Alt225/55 R1919x7 ET45 5x108–TiresRims

AX7 Classic 1.5T

148 hp · 1.5 L DFMA15T I4 Petrol 1.5 L DFMA15T I4 225/65 R17 3 fitments
GenerationDongfeng Aeolus AX7 Classic 2019–2022
MarketChina
Power148 hp
Engine1.5 L DFMA15T I4 Petrol 1.5 L DFMA15T I4, Petrol
Center bore65.1 mm
PCD5x108
ThreadM12 x 1.25
FitTire sizeRim size and bolt patternPressure, psiPrices
OE225/65 R1717x6.5 ET43 5x108–TiresRims
OE225/60 R1818x6.5 ET43 5x108–TiresRims
Alt225/55 R1919x7 ET45 5x108–TiresRims

AX7 Classic 1.6T

165 hp · 1.6 L 10UF01 5G02 I4 Petrol 1.6 L 10UF01 5G02 I4 225/65 R17 3 fitments
GenerationDongfeng Aeolus AX7 Classic 2019–2022
MarketChina
Power165 hp
Engine1.6 L 10UF01 5G02 I4 Petrol 1.6 L 10UF01 5G02 I4, Petrol
Center bore65.1 mm
PCD5x108
ThreadM12 x 1.25
FitTire sizeRim size and bolt patternPressure, psiPrices
OE225/65 R1717x6.5 ET43 5x108–TiresRims
OE225/60 R1818x6.5 ET43 5x108–TiresRims
Alt225/55 R1919x7 ET45 5x108–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.