2015 DR DR5 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2015 DR DR5.

2015 DR DR5 tire sizes

215/70R16 235/60R16

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2014 – 2017 3 trims

117 hp · I4 Petrol- 215/70 R16 99H 2 fitments

GenerationI Facelift 2014–2017

Power117 hp

EngineI4 Petrol-, Lpg

Center bore60.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
215/70 R16 99H	16x7 ET45 ~~5x114.3~~	29	Tires Rims
235/60 R16 100H	16x7 ET33 ~~5x114.3~~	29	Tires Rims

107 hp · I4 Petrol- 215/70 R16 99H 2 fitments

GenerationI Facelift 2014–2017

Power107 hp

EngineI4 Petrol-, Lpg

Center bore60.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
215/70 R16 99H	16x7 ET45 ~~5x114.3~~	29	Tires Rims
235/60 R16 100H	16x7 ET33 ~~5x114.3~~	29	Tires Rims

137 hp · I4 Petrol- 215/70 R16 99H 2 fitments

GenerationI Facelift 2014–2017

Power137 hp

EngineI4 Petrol-, Lpg

Center bore60.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
215/70 R16 99H	16x7 ET45 ~~5x114.3~~	29	Tires Rims
235/60 R16 100H	16x7 ET33 ~~5x114.3~~	29	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.