Skip to content

2017 DR DR5 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2017 DR DR5.

2017 DR DR5 tire sizes

Bolt patterns
5x114.3
I Facelift

2 generations were sold in 2017. Check your chassis code before ordering wheels.

Fitment tables

2 trims sold in 2017

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

DR DR5 II

2017 – 2017 1 trim

DR5 1.6i

125 hp · SQRE4G16 I4 Petrol- 215/60 R17 93S 2 fitments
GenerationII 2017–2017
Power125 hp
EngineSQRE4G16 I4 Petrol-, Lpg
Center bore60.1 mm
PCD5x108
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
215/60 R17 93S17x7 ET45 5x10829TiresRims
215/55 R18 93S18x7 ET45 5x10829TiresRims

DR DR5 I Facelift

2014 – 2017 1 trim

DR5 1.6i

125 hp · I4 Petrol- 215/70 R16 99H 2 fitments
GenerationI Facelift 2014–2017
Power125 hp
EngineI4 Petrol-, Lpg
Center bore60.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
215/70 R16 99H16x7 ET45 5x114.329TiresRims
235/60 R16 100H16x7 ET33 5x114.329TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.