Skip to content

2003 Fiat Palio tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2003 Fiat Palio.

Bolt pattern
Fitment tables

6 trims sold in 2003

Open a trim for its factory package and every alternative size, front and rear.

Fiat Palio 178

1996 – 2003 Latin America market 6 trims

Palio 1.2i

59 hp · I4 175/65 SR14 3 fitments
Generation178 1996–2003
Power59 hp
EngineI4, Petrol
Center bore58.1 mm
PCD4x98
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
175/65 SR1414x5.5 ET44 4x9829TiresRims
185/60 SR1414x5.5 ET40 4x9829TiresRims
185/55 HR1515x6 ET40 4x9832TiresRims

Palio 1.5i

84 hp · I4 175/65 SR14 3 fitments
Generation178 1996–2003
Power84 hp
EngineI4, Petrol
Center bore58.1 mm
PCD4x98
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
175/65 SR1414x5.5 ET44 4x9829TiresRims
185/60 SR1414x5.5 ET40 4x9829TiresRims
195/50 HR1515x6 ET35 4x9832TiresRims

Palio 1.6i

102 hp · I4 175/65 SR14 3 fitments
Generation178 1996–2003
Power102 hp
EngineI4, Petrol
Center bore58.1 mm
PCD4x98
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
175/65 SR1414x5.5 ET44 4x9829TiresRims
185/60 HR1414x6 ET40 4x9829TiresRims
195/50 HR1515x6.5 ET34 4x9832TiresRims

Palio 1.7D

68 hp · I4 175/65 SR14 3 fitments
Generation178 1996–2003
Power68 hp
EngineI4, Diesel
Center bore58.1 mm
PCD4x98
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
175/65 SR1414x5.5 ET44 4x9829TiresRims
185/60 SR1414x6 ET40 4x9829TiresRims
195/50 HR1515x6 ET35 4x9832TiresRims

Palio 1.8i

114 hp · I4 185/60 HR14 3 fitments
Generation178 1996–2003
Power114 hp
EngineI4, Petrol
Center bore58.1 mm
PCD4x98
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
185/60 HR1414x6 ET34 4x9829TiresRims
195/50 HR1515x6.5 ET34 4x9832TiresRims
205/45 VR1616x7 ET32 4x9832TiresRims

Palio 1.9D

62 hp · I4 175/65 SR14 3 fitments
Generation178 1996–2003
Power62 hp
EngineI4, Diesel
Center bore58.1 mm
PCD4x98
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
175/65 SR1414x5.5 ET44 4x9829TiresRims
185/60 SR1414x6 ET40 4x9829TiresRims
195/50 HR1515x6.5 ET34 4x9832TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.