Skip to content

2006 Fiat Palio tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2006 Fiat Palio.

Bolt pattern
Fitment tables

4 trims sold in 2006

Open a trim for its factory package and every alternative size, front and rear.

Fiat Palio 178 Facelift

2004 – 2007 Latin America market 4 trims

Palio 1.5i

84 hp · I4 Flex-Fuel 175/65 R14 82T 3 fitments
Generation178 Facelift 2004–2007
Power84 hp
EngineI4 Flex-Fuel
Center bore58.1 mm
PCD4x98
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
175/65 R14 82T14x5.5 ET44 4x9829TiresRims
185/60 R14 82H14x5.5 ET44 4x9829TiresRims
185/55 R15 82H15x6 ET34 4x9829TiresRims

Palio 1.6i

102 hp · I4 Flex-Fuel 175/65 R14 82T 3 fitments
Generation178 Facelift 2004–2007
Power102 hp
EngineI4 Flex-Fuel
Center bore58.1 mm
PCD4x98
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
175/65 R14 82T14x5.5 ET44 4x9829TiresRims
185/60 R14 82H14x5.5 ET44 4x9829TiresRims
185/60 R15 84H15x6 ET34 4x9829TiresRims

Palio 1.8i

114 hp · I4 Flex-Fuel 185/60 R14 82H 3 fitments
Generation178 Facelift 2004–2007
Power114 hp
EngineI4 Flex-Fuel
Center bore58.1 mm
PCD4x98
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
185/60 R14 82H14x5.5 ET44 4x9829TiresRims
185/60 R15 84H15x5.5 ET44 4x9829TiresRims
195/55 R15 84V15x6 ET0.34 4x9829TiresRims

Palio 1.9D

62 hp · I4 175/65 R14 82S 3 fitments
Generation178 Facelift 2004–2007
Power62 hp
EngineI4, Diesel
Center bore58.1 mm
PCD4x98
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
175/65 R14 82S14x5.5 ET44 4x9829TiresRims
185/60 R14 82T14x5.5 ET44 4x9829TiresRims
185/55 R15 82T15x5.5 ET44 4x9829TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.