2000 Ford Falcon tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2000 Ford Falcon.

2000 Ford Falcon tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1998 – 2002 Australia market 3 trims

211 hp · I6 215/60 R16 2 fitments

GenerationAU 1998–2002

Power211 hp

EngineI6, Petrol

Center bore70.5 mm

PCD5x114.3

Thread1/2" - 20 UNF

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
215/60 R16	16x7 ET50 ~~5x114.3~~	–	Tires Rims
215/55 R17	17x7.5 ET42 ~~5x114.3~~	–	Tires Rims

248 hp · V8 225/50 R16 1 fitment

GenerationAU 1998–2002

Power248 hp

EngineV8, Petrol

Center bore70.5 mm

PCD5x114.3

Thread1/2" - 20 UNF

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
225/50 R16	~~5x114.3~~	–	Tires

268 hp · V8 235/45 ZR17 1 fitment

GenerationAU 1998–2002

Power268 hp

EngineV8, Petrol

Center bore70.5 mm

PCD5x114.3

Thread1/2" - 20 UNF

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
235/45 ZR17	~~5x114.3~~	–	Tires

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.