2001 Ford Falcon tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2001 Ford Falcon.

2001 Ford Falcon tire sizes

235/45R17 215/60R16 215/55R17 245/40R18

Bolt pattern

5x114.3

Other years

1997 1998 1999 2000 2001 2002 2003 2004 All 1960–2017

Fitment tables

4 trims sold in 2001

Open a trim for its factory package and every alternative size, front and rear.

Ford Falcon AU

1998 – 2002 Australia market 4 trims

Falcon 4.0i

211 hp · I6 215/60 R16 2 fitments

GenerationAU 1998–2002

Power211 hp

EngineI6, Petrol

Center bore70.5 mm

PCD5x114.3

Thread1/2" - 20 UNF

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
215/60 R16	16x7 ET50 ~~5x114.3~~	–	Tires Rims
215/55 R17	17x7.5 ET42 ~~5x114.3~~	–	Tires Rims

Falcon 5.0i

335 hp · V8 245/40 ZR18 1 fitment

GenerationAU 1998–2002

Power335 hp

EngineV8, Petrol

Center bore70.5 mm

PCD5x114.3

Thread1/2" - 20 UNF

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
245/40 ZR18	~~5x114.3~~	–	Tires

Falcon 5.0i

295 hp · V8 235/45 ZR17 1 fitment

GenerationAU 1998–2002

Power295 hp

EngineV8, Petrol

Center bore70.5 mm

PCD5x114.3

Thread1/2" - 20 UNF

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
235/45 ZR17	~~5x114.3~~	–	Tires

Falcon 5.0i

268 hp · V8 235/45 ZR17 1 fitment

GenerationAU 1998–2002

Power268 hp

EngineV8, Petrol

Center bore70.5 mm

PCD5x114.3

Thread1/2" - 20 UNF

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
235/45 ZR17	~~5x114.3~~	–	Tires

Reading the table

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.