1987 Ford Festiva tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1987 Ford Festiva.

1987 Ford Festiva tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1986 – 1989 2 trims

51 hp · 1.1 L B1 I4 Petrol 1.1 L B1 I4 165/70 R12 / 165/70 R12 3 fitments

GenerationI 1986–1989

MarketJapan

Power51 hp

Engine1.1 L B1 I4 Petrol 1.1 L B1 I4, Petrol

Center bore59.6 mm

PCD4x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
Front165/70 R12	12x ~~4x114.3~~	29	Tires Rims
Rear165/70 R12	~~4x114.3~~	29	Tires
165/65 R13	13x5 ET40 ~~4x114.3~~	32	Tires Rims
175/60 R13	13x5 ET40 ~~4x114.3~~	29	Tires Rims

63 hp · 1.3 L B3 I4 Petrol 1.3 L B3 I4 165/70 R12 / 165/70 R12 3 fitments

GenerationI 1986–1989

MarketJapan

Power63 hp

Engine1.3 L B3 I4 Petrol 1.3 L B3 I4, Petrol

Center bore59.6 mm

PCD4x114.3

ThreadM12 x 1.5

Fit	Tire size	Rim size and bolt pattern	Pressure, psi	Prices
OE	Front165/70 R12	12x ~~4x114.3~~	29	Tires Rims
	Rear165/70 R12	~~4x114.3~~	29	Tires
Alt	165/65 R13	13x5 ET40 ~~4x114.3~~	32	Tires Rims
Alt	175/60 R13	13x5 ET40 ~~4x114.3~~	29	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.