Skip to content

1991 Ford Festiva tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1991 Ford Festiva.

Bolt pattern
Fitment tables

3 trims sold in 1991

Open a trim for its factory package and every alternative size, front and rear.

Ford Festiva I Facelift

1989 – 1993 3 trims

Festiva 1.1 E-DA1PF

51 hp · 1.1 L B1 I4 Petrol 1.1 L B1 I4 165/70 R12 / 165/70 R12 3 fitments
GenerationI Facelift 1989–1993
MarketJapan
Power51 hp
Engine1.1 L B1 I4 Petrol 1.1 L B1 I4, Petrol
Center bore59.6 mm
PCD4x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
Front165/70 R1212x 4x114.329TiresRims
Rear165/70 R12 4x114.329Tires
165/65 R1313x5 ET40 4x114.332TiresRims
175/60 R1313x5 ET40 4x114.329TiresRims

Festiva 1.3 E-DAJPF

82 hp · 1.3 L BJ I4 Petrol 1.3 L BJ I4 175/60 HR13 / 175/60 HR13 3 fitments
GenerationI Facelift 1989–1993
MarketJapan
Power82 hp
Engine1.3 L BJ I4 Petrol 1.3 L BJ I4, Petrol
Center bore59.6 mm
PCD4x114.3
ThreadM12 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OEFront175/60 HR1313x 4x114.329TiresRims
Rear175/60 HR13 4x114.329Tires
Alt165/65 R1313x5 ET40 4x114.332TiresRims
Alt185/50 HR1414x5.5 ET35 4x114.332TiresRims

Festiva 1.3 R-DA3VF

63 hp · 1.3 L B3 I4 Petrol 1.3 L B3 I4 165/70 R12 / 165/70 R12 3 fitments
GenerationI Facelift 1989–1993
MarketJapan
Power63 hp
Engine1.3 L B3 I4 Petrol 1.3 L B3 I4, Petrol
Center bore59.6 mm
PCD4x114.3
ThreadM12 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OEFront165/70 R1212x 4x114.329TiresRims
Rear165/70 R12 4x114.329Tires
Alt165/65 R1313x5 ET40 4x114.332TiresRims
Alt175/60 R1313x5 ET40 4x114.329TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.