1997 Ford Probe tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1997 Ford Probe.

1997 Ford Probe tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1993 – 1998 2 trims

118 hp · I4 205/55 R15 87S 2 fitments

GenerationII 1993–1998

MarketUSA

Power118 hp

EngineI4, Petrol

Center bore67.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/55 R15 87S	15x6 ET40 ~~5x114.3~~	1.8	Tires Rims
195/65 R14 88S	14x5.5 ET35 ~~5x114.3~~	1.8	Tires Rims

162 hp · V6 225/50 R16 91V 1 fitment

GenerationII 1993–1998

MarketAustralia

Power162 hp

EngineV6, Petrol

Center bore67.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
225/50 R16 91V	16x7 ET40 ~~5x114.3~~	1.8	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.