2016 Haval H6 Coupe tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2016 Haval H6 Coupe.

2016 Haval H6 Coupe tire sizes

225/65R17 225/55R19

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2015 – 2019 3 trims

148 hp · GW4G15B I4 225/65 R17 102H 1 fitment

GenerationI 2015–2019

Power148 hp

EngineGW4G15B I4, Petrol

Center bore64.1 mm

PCD5x114.3

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
225/65 R17 102H	17x6.5 ET50 ~~5x114.3~~	32	Tires Rims

194 hp · GW4C20 I4 225/65 R17 102H 2 fitments

GenerationI 2015–2019

Power194 hp

EngineGW4C20 I4, Petrol

Center bore64.1 mm

PCD5x114.3

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
225/65 R17 102H	17x6.5 ET50 ~~5x114.3~~	32	Tires Rims
225/55 R19 99H	19x7 ET50 ~~5x114.3~~	32	Tires Rims

161 hp · GW4D20D I4 225/65 R17 102H 2 fitments

GenerationI 2015–2019

Power161 hp

EngineGW4D20D I4, Diesel

Center bore64.1 mm

PCD5x114.3

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
225/65 R17 102H	17x6.5 ET50 ~~5x114.3~~	32	Tires Rims
225/55 R19 99H	19x7 ET50 ~~5x114.3~~	32	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.