Skip to content

2019 Haval H6 Coupe tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2019 Haval H6 Coupe.

2019 Haval H6 Coupe tire sizes

Bolt pattern

2 generations were sold in 2019. Check your chassis code before ordering wheels.

Fitment tables

2 trims sold in 2019

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Haval H6 Coupe II

2018 – 2023 1 trim

H6 Coupe 1.5T

166 hp · GW4B15 I4 225/65 R17 102H 2 fitments
GenerationII 2018–2023
MarketChina
Power166 hp
EngineGW4B15 I4, Petrol
Center bore64.1 mm
PCD5x114.3
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
225/65 R17 102H17x6.5 ET50 5x114.332TiresRims
225/55 R19 99H19x7 ET50 5x114.332TiresRims

Haval H6 Coupe I

2015 – 2019 1 trim

H6 Coupe 2.0T

188 hp · 2.0L GW4C20 I4 225/65 R17 102H 2 fitments
GenerationI 2015–2019
MarketEurope
Power188 hp
Engine2.0L GW4C20 I4, Petrol
Center bore64.1 mm
PCD5x114.3
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
225/65 R17 102H17x6.5 ET50 5x114.332TiresRims
225/55 R19 99H19x7 ET50 5x114.332TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.