1989 Holden Apollo tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1989 Holden Apollo.

1989 Holden Apollo tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1989 – 1992 Australia market 2 trims

110 hp · 3S-FC I4 165x SR13 2 fitments

GenerationJK/JL 1989–1992

Power110 hp

Engine3S-FC I4, Petrol

Center bore60.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
165x SR13	13x5 ET39 ~~5x114.3~~	–	Tires Rims
185/70 SR14	14x5.5 ET45 ~~5x114.3~~	–	Tires Rims

126 hp · 3S-FE I4 185/70 SR14 2 fitments

GenerationJK/JL 1989–1992

Power126 hp

Engine3S-FE I4, Petrol

Center bore60.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
185/70 SR14	14x5.5 ET45 ~~5x114.3~~	–	Tires Rims
195/60 HR15	15x6 ET45 ~~5x114.3~~	–	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.