1996 Holden Apollo tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1996 Holden Apollo.

1996 Holden Apollo tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1993 – 1996 Australia market 2 trims

125 hp · 5S-FE I4 185/70 R14 88S 2 fitments

GenerationJM/JP 1993–1996

Power125 hp

Engine5S-FE I4, Petrol

Center bore60.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
185/70 R14 88S	14x5.5 ET45 ~~5x114.3~~	–	Tires Rims
195/60 R15 88H	15x6 ET45 ~~5x114.3~~	–	Tires Rims

182 hp · 3VZ-FE V6 195/60 R15 88H 2 fitments

GenerationJM/JP 1993–1996

Power182 hp

Engine3VZ-FE V6, Petrol

Center bore60.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
195/60 R15 88H	15x5.5 ET45 ~~5x114.3~~	–	Tires Rims
205/50 R16 89V	16x6 ET42 ~~5x114.3~~	–	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.